WELCOME TO SEKO Machinery Co.Ltd. WEBSITE

One-stop service platform of
High-end industrial weld pipe making machine

Website
Dimensional
Code
SEKO SEKO
NEWS
Home > News > FAQ > What is the Drain-waste-vent (DWV)?(4)

FAQ

You need a phone that we will provide the most suitable products, so you spend the least money to achieve the best results

SEKO

Contact

SEKO

Add.:No.13,Haiyu 2nd Road,Fuyu Village,Leliu Town,Shunde District, Foshan City,Guangdong

Tel:0757-29390988

E-mail:seko@gdseko.com

What is the Drain-waste-vent (DWV)?(4)

Source:Lucy Xie Time:2016-7-22 17:34:57

9. Double sanitary tee (sanitary cross)

Similar to a cross. This fitting differs from a standard cross in that two of the ports have curved inlets. The fitting has been used in the past for connecting the drains of back-to-back fixtures (such as back-to-back sinks). Some current codes (including the 2006 UPC) prohibit the use of this fitting for that purpose, instead requiring a special "double fixture fitting" (double combination wye) since that prevents the two sides from flowing into each other more.

Seko circular pipe polishing machine is suitable for polishing various metal appearance of square and rectangular cross section. The whole machine is covered by four parts , polishing host, feeding device, discharge device and control system composed .

 

10. Sanitary tee

A sanitary tee is a tee with a curved center section. In drainage systems, it is primarily used to connect horizontal drains (including fixture trap arms) to vertical drains. The center connection is generally connected to the pipe which leads to a trap (the trap arm). However, it is against all major plumbing codes to use a sanitary tee to connect a vertical drain to a horizontal drain, because of the likelihood that solids will accumulate at the bottom of the junction and cause a blockage.

11. Slip joint fitting

Slip joint fittings are frequently used in kitchen, bathroom and tub water drain systems. They include a detached (movable) "slip nut" and "slip joint washer" (the washer is made of rubber or nylon). An added benefit of this type of fitting is that the pipe it is connecting to doesn't have to be cut to precise fit, but the slip joint can attach within a range of the end of the inserting pipe. Many slip fittings are "hand tightenable" for easier entry to the residential drain pipe systems (for instance to clean out the P trap or have access to the drain line past the P trap).


Guangdong Shunde Seko Machinery & Technology Co.,Ltd.

www.gdseko.com 

Email: sevvice@gdseko.com

Skype:Lucy Xie,SEKO Machinery

Suggested Reading:What is the Drain-waste-vent (DWV)?(3)

Product: HF Pipe Making Machine Coil Pipe Making MachineBead Rolling MachineAnnealing Machine



[PREV]:2
[NEXT]:What is the Drain-waste-vent (DWV)?(3)
[GO BACK]
[HOME]

HOME | Tube Mills | Weld Bead Rolling Machine | Bright Annealing Machine | Cooperation case | Seko News | About Seko | Contact us

Add.:No.13,Haiyu 2nd Road,Fuyu Village,Leliu Town,Shunde District,Foshan City,Guangdong

Tel:0757-29390988  E-mail:seko@gdseko.com  Web:www.gdseko.com

Desigh by Ceall.net

Copyright © Guangdong Shunde Seko Machinery Co.Ltd. All rights reserved   

  skype